CGK-1PROGRAMMED irrigation Controller
This newly developed Hi-Tech” product is technically the brain of
an entire microprocessor-programmed irrigation system, which is
combined with 3 main components including the above controller,
control valves( such like our DSF” series solenoid valves)&
also sprinklers for intelligent applications: either to water
automatically(timing& rationing) green gardens, planting
farmlands( especially cultivations inside sheds), parks&
fountains etc.; or to water intelligently adjusted as per
variations in the natural environment(rains, aridities, seasons
etc),so as to achieve the efficient irrigation optimized for
water-saving.
The CGK-1” programmed irrigation controller is made of
integrated-circuit microchips for operation simultaneously max. 12
watering stations but under totally 3 different programs set
separately, in order to control the individual stations as desired.
And if connected with the suitable rain sensor, it could even be
applied for water-saving irrigations intelligently.
Main Technical Specifications:
1、Watering Programs: Offering a maximum scheduling flexibility
including 3 independent programs(A”/”B”/”C”),each for controlling
max.12 watering stations separately & also an additional load
with the power consumption rated as 13W.”;
2、Watering Start Timers: 4per day& per program, namely max.12
daily starts times;
3、Watering Schedule:7-day calendar, interval watering up to a
max.31-day interval or true odd/even day programming, made possible
by the built-in electronic 365-day clock/calendar showing the
week& date;
4、Station Running Times for Individual Stations: From 1 minute
increments on 3 independent programs;
5、Other Advanced & Hidden Features: Up to 4-hour programmable
watering delay between stations, a one-time watering of a single
station or all designated stations in a selected program,
No-water-day option from 1 to 7 days for all selected stations,
manual seasonal adjustments for changing stations’ run times from
10% to 15% of the original programmed watering time as per weather
changes;
6、Transformer Input:120 VAC.-60Hz. Or 230 VAC.-50/60Hz. for the
international use(voltage deviation allowance:-15%to +5%);
7、Transformer Output:24 VAC./1 Amp. To the controller;
8、Station Output: 24 VAC.per station(safety voltage);
9、Battery:9-Volt alkaline battery (not included ) to be used only
for programming without A.C.” power supply, while the non-volatile
memory could still maintain the program information during a power
outage even if no battery was installed. But please note that
watering would never occur if without A.C.” power supply!
10、Dimensions of the Plastic
Cabinet:243mm.(height)X210mm.(width)X90mm.(depth).
Remarks:”CGK-1” programmed irrigation controller and DSF” solenoid
valves are to ve available for supply either separately or combined
together.
